Sika Primer 3 N

Clear primer for porous surfaces, metal and with other Sika products

$54.00$115.00 inc GST

Quantity:
SKU: B621CA Categories: , ,

Description

Description

Sika® Primer-3 N is a solvent-based, one component, transparent primer for porous surfaces and metal.

USES

Sika® Primer-3 N is designed for

  • Sikaflex®
  • SikaHyflex®
  • SikaBond®
  • Sikasil®
  • Products used on porous substrates (e.g. concrete)
  • Metals.

 

CHARACTERISTICS AND ADVANTAGES

  • Easy to apply
  • Water repellent
  • Short flash-off time

 

COLOUR
Transparent

 

PACKAGING
250ml bottle, 6 bottles per box
1L bottle, 4 bottles per box

 

SUBSTRATE PREPARATION
The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Cement laitance must be removed.

 

CLEANING OF EQUIPMENT
Clean all tools and application equipment immediately after use. Once cured, residual material can only be removed mechanically.

 

Sika Primer 3N Data Sheets

 

 

Sika® Primer 3 N – Sika’s Website

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Sika Primer 3 N”

Your email address will not be published. Required fields are marked *

Disclaimer

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.